Hi Guys, We are planning to produce high quality and precise robotic devices. This servo control system is the first step of a motion control system. Position accuracy is 360/2000 degree (0.18°) on the motor shaft. It is working like a charm and i’m very impressed from the results. I hope we will use [...]
We released FL20A series ESCs only few days before. These high resolution and fast response ESCs require for very smooth and rigit multicopter control. FastPWM firmware have direct, linear throttle response without any ramp or motor speed smoothing function. This mean your motor resolves any position problem before position changes. Here is the maiden flight [...]
Hi Everyone, I’m modifying my Turnigy 9X transmitter for an OpenLRS based telemetry system. Yesterday i added an ICSP and Serial port on my tx. This blog post about these modifications. I hope it helps to you when modifying your one. Before start this modifications please visit here: http://www.rcgroups.com/forums/showthread.php?t=1266162 At first i soldered some 6 wires [...]
Hi everyone, Here is the new baby of OpenLRS project OpenLRS Rx MULTI is a receiver with ITG3205 Gyro and ADXL345 accelerometer. Mean, you can use this receiver as a multicopter controller. You don’t need any cabling for sensors or receiver, just plug it to your ESCs and fly I modified MultiWii v1.9 code for [...]
Hi Guys, We are working on a high altitude glider project since 1-2 years. The project going slow because of our other projects but i’m writing and testing some codes since 1-2 weeks. The main system on the device will be an OpenLRS RC receiver. We already integrated most of IMU sensors and GPS for [...]
Hi Guys, I promissed “you can use our radio receivers as multicopter controller” when we start the OpenLRS Project. Now it’s working! I merged OpenLRS Radio receiver code with MultiWiiCopter project, added OpenLRS tab into MultiWii 1.9 firmware and replaced 10-15 lines into the original code for radio system integration. Then you dont need an [...]
Our new Blue Strobons in stocks. It is coolest Strobe light ever
ArduPlay Display Driver Boards in stocks. Here is the product details: http://store.flytron.com/open-source-hardwares/148-arduplay-open-source-display-.html Thank you for following Bora & Melih
Our new laser cutter arrived today. It is second hand cutter but there is no problem for us, because a laser cutter including only 2 step motor, a laser tube and a driver board. I fixed the lens holders and mirrors and done! it is working like a charm. Original driver board only accepting PLT [...]
I am pleased to introduce to you our new product, ArduPlay. ArduPlay is a display driver that designed over 16Mhz Arduino Pro Mini 168 system. ArduPlay including; 16×2 display FTDI port for firmware loading serial input analog input a LED a button supply voltage divider for measuring the supply battery. You can use the Arduplay for displaying your [...]